Moxa INJ-24A Guia de Instalação

 2012 Moxa Inc. All rights reserved. P/N: 1802000240020 Moxa High-Power PoE+ Injector INJ-24A Series Hardware Installation Guide First E

- 10 - Environmental Limits Operating Temperature Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage T

- 2 - Overview The Moxa INJ-24A Series high-power PoE+injector is a 1-port PoE+ injector that delivers both data and electrical power to Ethernet-ena

- 3 - WARNING Safety First! Be sure to disconnect the power cord before installing and/or wiring your Moxa PoE injector. Calculate the maximum possi

- 4 - Rugged Design • Active PoE short-circuit and current-overloading protections • Auto PoE device detection and classification • 3 KV PoE surge

- 5 - Mounting Dimensions (unit = mm)

- 6 - DIN-Rail Mounting The DIN rail attachment plate should already be fixed to the back panel of INJ-24A when you take it out of the box. If you

- 7 - STEP 3: Once the screws are fixed on the wall, insert the four screw heads through the large parts of the keyhole-shaped apertures, and then s

- 8 - DIP Switch Settings The default setting for each DIP switch is OFF. The following table explains the effect of setting the DIP switches to the

- 9 - Smart PoE LED Indicators Two SmartPoE LEDs indicate the current status between PSE and PD and the power output mode of the INJ-24A. The followi