Moxa AWK-3131-EU-T Guia de Instalação

 2011 Moxa Inc. All rights reserved. P/N: 1802031310010 AWK-3131 Hardware Installation Guide Moxa AirWorks First Edition, February 2011

- 10 - ATTENTION Before connecting the AWK-3131 to the DC power inputs, make sure the DC power source voltage is stable. Wiring the Relay Contact T

- 11 - Communication Connections 10/100BaseT(X) Ethernet Port Connection The 10/100BaseT(X) ports located on the AWK-3131’s front panel are used to c

- 12 - NOTE 1. The pin numbers for male DB9 and DB25 connectors, and hole numbers for female DB9 and DB25 connectors are labeled on the connector.

- 13 - LAN Green/ Amber Amber LAN port’s 10/100 Mbps link is active. Amber Blinking Data is being transmitted at 10/100 Mbps Amber Off LAN port’s 10

- 14 - TX Transmit Power: 802.11b: 1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm) 802.11g: 6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm) 36 to 48 Mbps: Typ. 17 dBm (

- 15 - Alarm Contact: 1 relay output with current carrying capacity of 1 A @ 24 VDC Digital Inputs: 2 electrically isolated inputs • +13 to +30

- 16 - ATTENTION Use the antennas correctly: The 2.4 GHz antennas are needed when the AWK-3131 operates in IEEE 802.11b/g/n. The 5 GHz antennas are

- 2 - Overview Moxa's new AWK-3131 3-in-1 industrial wireless AP/bridge/client meets the growing need for faster data transmission speeds and wi

- 3 - • SFP-1GLHXLC: Small form factor pluggable transceiver with 1000BaseLHX, LC, 40 km, 0 to 60°C • SFP-1GLHXLC-T: Small form factor pluggable tr

- 4 - ATTENTION For security reasons, we strongly recommend changing the password. To do so, select Maintenance  Password, and then follow the on-s

- 5 - Panel Layout of the AWK-3131 1. Grounding screw 2. Terminal block for PWR1,PWR2, relay, DI1, and DI2 3. Reset button 4. System LEDs: PWR1

- 6 - Mounting Dimensions (unit = mm) DIN-Rail Mounting The aluminum DIN-Rail attachment plate should be fixed to the back panel of the AWK-3131 whe

- 7 - Wall Mounting (optional) For transportation applications that require an EN 50155 certification report, we strongly recommend the purchase of t

- 8 - WARNING • This equipment is intended to be used in a Restricted Access Location, such as a dedicated computer room. Access can only be gained

- 9 - ATTENTION This product is intended to be supplied by a Listed Power Unit marked “Class 2” or “LPS” and rated O/P: 12 to 48 VDC, minimum 6 W (1