Moxa ONCELL G2110-T Manual do Utilizador descarregar pdf (Página 67)

OnCell G2100 Series User’s Manual AT Command Set

4-9

3. To enable the facility lock, type AT+CLCK=“SC”,1,<pin>

The following example shows "0000" being used for the PIN.

ATTENTION

Once the correct PIN is entered, the system (firmware V1.2 or above) will activate the Automatic

PIN Entry function. This function will store the current PIN in its memory and enter it into the

OnCell G2100 Series modem each time the system boots up. If the SIM card does not match the

current PIN, the Automatic PIN Entry function will be deactivated.

To activate the Automatic PIN Entry function again, use the AT+ CPIN command or OnCell

Configurator to enter the correct PIN.

To disable Automatic PIN Entry once and for all, use the AT*USEPIN=0 command.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 104 105

Sem comentários

Moxa ONCELL G2110-T Manual do Utilizador Página 67