Moxa AWK-1121 Guia de Instalação descarregar pdf (Página 6)

- 6 -

Wall Mounting (optional)

For some applications, it may be more convenient to mount the

AWK-1121 to a wall, as illustrated below.

STEP 1:

Remove the aluminum

DIN

-Rail attachment plate

from the

AWK-1121, and

then attach the wall

mount

plates with M3 screws, as

shown in the adjacent

diagrams.

STEP 2:

Mounting the

AWK-1121 to a wall requires 4 screws.

Use the

AWK-1121 device, with wall mount plates

attached, as a guide to mark the correct locations of

the 4 screws. The heads of the screws should be less

than 6.0 mm in diameter, and the

shafts should be less

than 3.5 mm in diameter, as shown in the figure at the

right.

Do not screw the screws in all the way

—

leave a space

of about 2 mm to allow room for sliding the wall mount

panel between the wall and the screws.

NOTE

Test the screw head and shank size by inserting the screw into

one of the keyhole shaped apertures

of the Wall Mounting Plates

before it is screwed into the wall.

STEP 3:

Once the screws are fixed

into the wall, insert the four

screw heads through the

large opening of the

keyhole

-shaped apertures,

and then slide the

AWK

-1121 downwards, as

indicated to the right.

Tighten the four screws for

added stability.

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

Moxa AWK-1121 Guia de Instalação Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Pontos de acesso WLAN Moxa AWK-1121