Moxa AWK-5222-EU Manual do Utilizador Página 47

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 100
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 46
AWK-5222 User’s Manual Other Console Configurations
3-29
enabled to support long-distance transmission.
Transmission enhancement is also recommended to enable communication at both ends when
long-distance transmission is required. A high-gain antenna installed at a fixed antenna
connector can also improve performance. (Select Antenna at MAIN or AUX.)
Antenna
Setting Description Factory Default
Auto
The AWK-5222 uses four antennas (two MAIN
and two AUX) and enables the diversity
function for reducing multipath effect.
MAIN 1 and MAIN 2
Diversity function is disabled. Only MAIN 1
and 2 antenna is in use.
AUX 1 and AUX 2
Diversity function is disabled. Only AUX 1 and
2 antenna is in use.
Auto
EAPOL Version
Setting Description Factory Default
1 EAPOL version 1 was standardized in the 2001
version of 802.1X, which is much more
commonly implemented.
2 EAPOL version 2 was specified in
802.1X-2004.
1
Turbo Roaming (for AP-Client operation mode's Client mode only)
Setting Description Factory Default
Enable/ Disable Moxa’s Turbo Roaming can enable rapid
handover when the AWK-5222, as a client,
roams among a group of APs.
Disable
When Turbo Roaming is enabled, RF type and Scan channels will be shown as follows. RF type
shows the current RF type, which this client is using now. You can set up Scan channels for the
APs among which this client is going to roam. There are three Scan channels available. Please note
that the Scan channels may need to be modified when the RF type is changed. (For example,
channel 36 is not available in B, G or B/G Mix mode.)
WLAN Certification Settings
(for EAP-TLS in Redundant Client, Client or Slave mode only)
Vista de página 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 99 100

Comentários a estes Manuais

Sem comentários