Moxa AWK-6222-US-T Guia de Instalação

Moxa AirWorks AWK-6222 Quick Installation Guide First Edition, October 2009 © 2009 Moxa Inc. All rights reserved. Reproduct

— 9 — ATTENTION To ensure the IP68-rated connectivity, you must use a waterproof housing during any communication activities. An IP68-rated field in

— 10 — STEP 3: Crimp the modular RJ plug to the cable; (NOTE: the snagless cover shield and strain-relief boot are not recommended.) Then, assemble t

— 11 — Green On WLAN is functioning in Client/Slave mode. Green Blink WLAN’s is transmitting data in Client/Slave mode. Amber On WLAN is functioning

— 12 — Protocol General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, RTP, PPPoE, DHCP AP-only Protocols: ARP, BOO

— 13 — Reverse Polarity Protection Present Mechanical Casing IP68 protection, aluminum case Dimensions 224 x 147.7 x 66.5 mm (8.82 x 5.82 x 2.62 in

— 14 — Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: +1-714-528-6777 Fax: +1-714-528-677

— 1 — Notes for the Reader WARNING Indicates that death or personal injury may occur if proper precautions are not taken. ATTENTION Indicates that

— 2 — ATTENTION For security reasons, we strongly recommend changing the password. To do so, go to Maintenance Æ Password, and then follow the on-sc

— 3 — Dimensions (unit = mm) ininininin Wall Mounting In most applications, wall mount provides an easier installation. You will find it quite easy t

— 4 — STEP 3: Once the screws are fixed into the wall, insert the four screw heads through the large opening of the keyhole-shaped apertures, and the

— 5 — To Install STEP 1: Use the recessed button on the spring-loaded bracket to lock it into position. STEP 2: Insert the top of the DIN-Rail into t

— 6 — You should also pay attention to the following items: y Use separate paths to route wiring for power and devices. If power wiring and device w

— 7 — ATTENTION This product is intended to be supplied by a Listed Power Unit marked “Class 2” or “LPS” and rated O/P: 12 to 48 VDC, minimum 6 W (1

— 8 — Communication Connections 10/100BaseT(X) Ethernet Port Connection The 10/100BaseT(X) ports located on the AWK-6222’s bottom panel are used to c