Moxa EDS-616 Guia de Instalação

 2010 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. P/N: 1802006000011 Moxa EtherDevice™ Switch EDS-600

- 10 - NOTE Before tightening the screws into the wall, make sure the screw head and shank size are suitable by inserting the screw through one of t

- 11 - ATTENTION Safety First! Be sure to disconnect the power cord before installing and/or wiring your Moxa EtherDevice Switch. Calculate the maxi

- 12 - ATTENTION This product is intended to be mounted to a well-grounded mounting surface such as a metal panel. Wiring the Relay Contact The EDS

- 13 - Wiring the Digital Inputs The EDS-600 has one set of digital inputs (DIs). Each DI consists of two contacts of the 5-pin terminal block connec

- 14 - RJ45 (10-pin) to DB9 (F) Cable Wiring 10/100/1000BaseT(X) Ethernet Port Connection The 10/100/1000BaseT(X) ports located on switch’s front pa

- 15 - RJ45 (8-pin) to RJ45 (8-pin) Straight-through Cable Wiring RJ45 (8-pin) to RJ45 (8-pin) Cross-over Cable Wiring 100BaseFX or 1000BaseSFP Fib

- 16 - ATTENTION This is a Class 1 Laser/LED product. To avoid causing serious damage to your eyes, do not stare directly into the laser beam. Tur

- 17 - “Turbo Ring V2” DIP Switch Settings DIP 1 DIP 2 DIP 3 DIP 4 ON: Enables the default “Ring Coupling (backup)” port. ON: Enables this EDS as

- 18 - CPLR/ TAIL GREEN On When the EDS-600 coupling function is enabled to form a back-up path or if it is set as the Tail of the Turbo Chain. Bli

- 19 - Digital Input Two inputs with the same ground, but electrically isolated from the electronics • For state “1”: +13 to +30 V • For state “0”:

- 2 - Package Checklist The Moxa EDS-600 series is shipped with the following items. If any of these items is missing or damaged, please contact your

- 20 - Vibration IEC60068-2-6 WARRANTY 5 years Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-28

- 3 - Panel Views of the EDS-608 Front Panel: 1. System Status LEDs 2. Fast Ethernet Interface Module port LEDs 3. Fast Ethernet Interface Module

- 4 - Panel Views of the EDS-611 Front Panel: 1. System Status LEDs 2. Fast Ethernet Interface Module port LEDs 3. Fast Ethernet Interface Module

- 5 - Panel Views of the EDS-616 Front Panel: 1. System Status LEDs 2. Fast Ethernet Interface Module port LEDs 3. Fast Ethernet Interface Module

- 6 - Panel Views of the EDS-619 Front Panel: 1. System Status LEDs 2. Fast Ethernet Interface Module port LEDs 3. Fast Ethernet Interface Module

- 7 - Mounting Dimensions (unit = mm) EDS-608/EDS-611

- 8 - EDS-616/EDS-619 DIN-Rail Mounting The aluminum DIN-Rail attachment plate should already be fixed to the back panel of the EDS-600 when you tak

- 9 - STEP 2—Insert the top of the DIN-Rail into the top slots on the DIN-Rail attachment plate. STEP 3—The DIN-Rail attachment unit will snap into p